VC U / hard PVC briefly explained. The PVC U panels are made from the plastic polyvinyl chloride. It is a compact (solid) sheet made of PVC. Due to its increased impact strength, it has excellent properties that make it ideal for a wide range of applications. It is resistant to environmental influences as well as the most common cleaning agents and disinfectants.In addition, the board has the fire certification "flame retardant" and can therefore also be used in areas where these inner values?? Protective film on one side thermoformable increased impact resistance Weatherproof good resistance to chemicals light weight Recyclable. The subsurface must be firm, stable, dry, clean and free of dust. Differences in the evenness of the subsurface must be professionally leveled out at the beginning or taken into account when applying the adhesive. Now take all the required dimensions and drill holes from the wall in order to transfer them to the plate.
Use bolt circle cutters for larger holes, e. For fittings, water supply lines or drain connections. The cutting is then carried out using commercially available tools that are suitable for plastics or metals. Clean the back of the plate so that the adhesive adheres better.Now apply the adhesive to the back of the plate. Use a B15 notched trowel to ensure that the adhesive is evenly distributed. PUT THE PLATE INTO POSITION. Carefully place the plate in the desired position and press it lightly upwards from below. In this way, you can still correct the position of the plate if necessary. Once the plate is in its final position, apply a lot of pressure over the entire surface. This will distribute the glue evenly and keep the panel in the desired position. Any adhesive escaping from the sides must be removed directly. Then remove the protective film. After successful assembly, the grouting is done with commercially available, neutrally crosslinking silicone.
It must be ensured that Allen open edges (cut and drilled surfaces) are clean and adequately sealed. Execution and provided with one-sided protective film. The cutting is then carried out using commercially available tools that are suitable for plastics. Kostenlos versichert werktags innerhalb 24 h.
This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Process Engineering Equipment\Plastic Processing Equipment\Other Plastic Processing Equipment & Supplies". The seller is "shop-schinkoethe" and is located in this country: DE. This item can be shipped to all countries in Europe.