Duschrückwand Fliesenersatz Fugenlose Wall Panel 2500 x 1000 Strength. The description of this item has been automatically translated.N oble shower back wall / wall cladding made of highly impact-resistant plastic for full-surface cladding of existing tiles or other materials. "Never again mold in the joints". 2,500 x 1,000 x 2 or 3 mm all other dimensions will be cut individually for you free of charge. If you have any questions, please write. In the case of custom-made products / cuts, there is no return. The perfect replacement for tiles when renovating, without much effort, dirt and noise and never again mold in the tile joints. Easy processing with a jigsaw and drill. Easy assembly - assembly adhesive directly on the existing substrate. Ideal for every installation situation and substrate (tiles, plaster, plasterboard, masonry and wood). Easy renovation and sealing with commercially available neutral-curing silicones. Absolutely resistant to mold and moisture. Approved in the food sector. Sheets maximum 2,500 x 1,000 x 3 mm or as a cut. Available in white with a glossy or matt surface, similar to RAL 9003.
In addition, the panels are provided with a protective film to protect the surface during installation. The panels are colored in pure white and are therefore opaque, the underlying surface e. PREPARING THE SUBSTRATE The subsurface must be firm, stable, dry, clean and free of dust. Differences in the evenness of the subsurface must be professionally leveled out at the beginning or taken into account when applying the adhesive.CUSTOMIZE (IF NEEDED) Now take all the required dimensions and drill holes from the wall in order to transfer them to the plate. Use bolt circle cutters for larger holes, e. For fittings, water supply lines or drain connections. The cutting is then carried out using commercially available tools that are suitable for plastics or metals.
APPLY GLUE Clean the back of the plate so that the adhesive adheres better. Now apply the adhesive to the back of the plate.
Use a B15 notched trowel to ensure that the adhesive is evenly distributed. PUT THE PLATE INTO POSITION Carefully place the plate in the desired position and press it lightly upwards from below.In this way, you can still correct the position of the plate if necessary PRESS PLATE FIRMLY Once the plate is in its final position, apply a lot of pressure over the entire surface. This will distribute the glue evenly and keep the panel in the desired position. Any adhesive escaping from the sides must be removed directly. Then remove the protective film. SEALING AND JOINTING After successful assembly, the grouting is done with commercially available, neutrally crosslinking silicone.
It must be ensured that Allen open edges (cut and drilled surfaces) are clean and adequately sealed. Renovate without dirt, noise and long downtimes. No skilled craftsmen are required. High-quality and at the same time inexpensive alternative to tiles. Easier processing than tiles or other materials.
The subsurface must be firm, stable, dry, clean and free of dust. Now take all the required dimensions and drill holes from the wall in order to transfer them to the plate. Once the plate is in its final position, apply a lot of pressure over the entire surface. Kostenlos innerhalb 24 h mit DHL. This item is in the category "Home, Furniture & DIY\Bath\Bathroom Accessories\Tile Décor".
The seller is "shop-schinkoethe" and is located in this country: DE. This item can be shipped to all countries in Europe.