Duschrückwand Back Panel Shower Nischendusche Mirror Tiles Wall Panel IN White. The description of this item has been automatically translated. 1 rear shower wall Made of highly impact-resistant plastic for full-surface cladding of existing tiles or other materials. The perfect replacement for tiles when renovating, without much effort, dirt and noise and never again mold in the tile joints. Product information : Panels maximum 2,000 x 1,000 x 2 mm or as a cut NEW also as 2500 x 1000 x 2 or 3 mm in stock Available in white silk gloss or silk matt.
In addition, the panels are provided with a protective film to protect the surface during installation. The panels are colored in pure white and are therefore opaque, the underlying surface e. Renovate without dirt, noise and long downtimes. No skilled craftsmen are required. High-quality and at the same time inexpensive alternative to tiles.Easier processing on tiles or other materials. The simple installation of the panels quickly explained. The subsurface must be firm, stable, dry, clean and free of dust. Differences in the evenness of the subsurface must be professionally leveled out at the beginning or taken into account when applying the adhesive.
CUSTOMIZE (IF NEEDED) Now take all the required dimensions and drill holes from the wall in order to transfer them to the plate. Use bolt circle cutters for larger holes, e.
For fittings, water supply lines or drain connections. The cutting is then carried out using commercially available tools that are suitable for plastics or metals. Strip off the back of the panel for better adhesion of the adhesive.
Now apply the adhesive to the back of the plate. Use a B15 notched trowel to ensure that the adhesive is evenly distributed. PUT THE PLATE INTO POSITION Carefully place the plate in the desired position and press it lightly upwards from below.In this way, you can still correct the position of the plate if necessary. PRESS PLATE FIRMLY Once the plate is in its final position, apply a lot of pressure over the entire surface.
This will distribute the glue evenly and keep the panel in the desired position. Any adhesive escaping from the sides must be removed directly. Then remove the protective film. SEALING AND JOINTING After successful assembly, the grouting is done with commercially available, neutrally crosslinking silicone. It must be ensured that Allen open edges (cut and drilled surfaces) are clean and adequately sealed.Available in white silk gloss or silk matt. Now take all the required dimensions and drill holes from the wall in order to transfer them to the plate. Once the plate is in its final position, apply a lot of pressure over the entire surface. Beständig bei allen handelsüblichen Reinigern. This item is in the category "Home, Furniture & DIY\Bath\Bathroom Accessories\Tile Décor". The seller is "shop-schinkoethe" and is located in this country: DE. This item can be shipped to all countries in Europe.